top of page

Search

Search this site

31 results found with an empty search

  • SBT 01 | AFS Technologies

    SBT 01 Assemble and Install Small Bore Tubing with Twin Ferrule Mechanical Grip Fittings Stage 1: (Onshore Test Centre based) ASSEMBLE AND INSTALL SMALL BORE TUBING WITH TWIN FERRULE MECHANICAL GRIP FITTINGS ECITB Small Bore Tubing (SBT01) Assemble and Install Small Bore Tubing with Twin Ferrule Mechanical Grip Fittings. This two day course provides delegates with the training required to demonstrate knowledge and practical skills of working with small bore tubing systems. This training course is designed for personnel undertaking operations on small bore tubing assemblies and systems using twin ferrule, mechanical grip fittings across all industries. Delegates will complete a knowledge test and practical exercises. This course is preparation for the ECITB Technical Tests TSBT01 & TSBT02 This 2 day Twin Ferrule Mechanical Grip Fittings course is aimed at learners with no previous small bore tubing training but can equally be undertaken by those with previous training or experience. Minimum estimated trainer to learner contact time 12 hours, minimum of 5 practical exercises: Exercise 1 will be assembling 4 manufacturer fittings - Swagelok, A-Lok, Gyrolok, Ringlok (Typically). Exercise 2 will be assemble Twin Ferrule fitting, disassemble and remake. Exercise 3 will be marking out, cutting, preparation, basic tube bending exercise. Exercise 4 will be marking out, cutting, preparation, tube bending exercise including rolled offset. Exercise 5 will be fabricate, install, support and clamp tube assembly, then pressure test by the trainer. This exercise will also have NPT taper and parallel fittings. Delegates completing an ECITB SBT01 - Assemble and Install Small Bore Tubing with Twin Ferrule Mechanical Grip Fittings training course will be able to: Work safely and minimise risk at all times Plan and configure small bore tubing assemblies Understand relevant health and safety legislation, regulations and safe working practices and procedures Understand the terminology, techniques and practices for planning and configuring small bore tubing assembly This two day course provides delegates with the training required to demonstrate the knowledge and practical skills of working with small bore tubing systems. This course is preparation for the ECITB Technical Tests TSBT01 & TSBT02. ECITB in conjunction with Step Change in Safety have agreed the model below to be promoted to industry and delivered by the ECITB approved training providers and test centres.

  • Asset Integrity blog | AFS Technologies

    Asset Integrity: Small Bore Tubing Statistics - Can you afford to wait? AFS Technologies are recognised as the leading independent expert in Small Bore Tubing (SBT) and Flexible Hose Assemblies (FHA), services. Our team are driven by our focus on reducing the carbon footprint of our clients by driving down releases of fluids to the atmosphere from instrumentation systems. With our unique offering of field services, consultancy, training and assembly products, we offer a solution that is independent of any of the fluid connector manufacturers. Having inspected over 1 million components since we started over 30 years ago we have some eye-opening statistics for you. An asset such as a production platform or FPSO has on average >15,000 components. On average we find a fault rate of over >40% on initial inspection Of those faults >80% are under-tight fittings On average we find 1 hydrocarbon leak per inspection trip All those under-tight fittings and hydrocarbon leaks have huge potential for something more catastrophic. A major operator in UKCS had a SBT release recently which led to several days shutdown until a repair could be completed. We provide periodic inspection with trained inspectors using our Risk Based Inspection software Integrale™ Still not convinced? We will inspect your asset for one trip for a fixed price with full detailed reports available online with Integrale™ CAN YOU AFFORD TO WAIT? On assets where we provide a managed service, we have reduced anomalies to 0.2%

  • Inspection Services blog | AFS Technologies

    Inspection Services Ensuring asset integrity is vital for the safety of personnel and for the reliability of asset operations. This is essential in relation to safety critical systems such as hydraulic and electrical control, intervention and shut-down systems and high-pressure components including small bore tubing and flexible hoses. Failure of your equipment could lead to unplanned shut-down, lost production or even worse result in injury and/or environmental damage. Accordingly, HSE experts recommend that regular inspection and maintenance is planned for as a critical part of your operations. Why inspect? Adhere to statutory regulations and prove compliance Ensure system safety and asset integrity Reduce environmental impact Enhance operational performance Prevent shut-downs Reduce costs Whatever your objective our subject matter experts recommend that regular inspection is planned for as a critical part of your operations. The quality of an inspection in terms of reliability and effectiveness directly translates into potential cost saving and efficiency benefits, and is therefore a crucial factor to consider. Small Bore Tubing (SBT) Flexible Hose Assemblies (FHA) Electrical ATEX IECEx Inspection Services, Powered by Integrale™ Powered by Integrale our multi-disciplinary asset integrity inspection software has Risk Based Inspection (RBI) functionality; this functionality will save you money alone. Integrale is an intuitive, application managing the inspection RBI regime for your assets. More info from gavinm@afst.uk.com

  • TSBT 01 | AFS Technologies

    ECITB Technical test TSBT01 Small Bore Tubing Twin ferrule fitting installation TSBT 01 Assemble and Install SBT (Twin Ferrule) Stage 3 – (Onshore Test Centre based) Book via email to training@afst.uk.com Stage 3 requires each individual to complete a formal assessment of their job knowledge, skills and ability in each Small Bore Tubing subject. The ECITB technical competence validation tests are standards based consisting of a bank of online knowledge questions and a practical task to validate the learner’s skills, knowledge and ability. The online knowledge test must be conducted as a closed book test; the candidate is not allowed to use handouts or reference materials in this part of the test. The candidate will be given access to reference materials for the practical element of the test. Successful candidates attain the ECITB certificate of achievement which is valid for a period of 3 years. Unsuccessful candidates must wait a minimum period of 4 weeks between the unsuccessful test session and next test session to allow for a period of training to address any skills or knowledge gaps. The Test Centre must confirm the following information with the employer/candidate before arranging the test session: Newly Trained Workers The Test Centre must ensure the newly trained worker has successfully completed Stages 1 and 2. A record of the Approved Course certificate serial number will be recorded on the completed Work Based Task Assignment. The completed Work Based Task Assignment will be stored along with the completed paper Examiner’s Results sheet for audit purposes. Existing Workers/Private Individuals Existing Workers will require a company letter of endorsement confirming attendance of previous BT or instrument pipework training or copies of pertinent ECITB certificates (where applicable) and that the individual has workplace experience in the SBT subject area they are being tested in. Existing Workers who attend one of the SBT training courses as “refresher training” must wait a minimum period of 4 weeks before being granted access to the relevant technical test. The Existing Workers will require a company letter of endorsement confirming attendance of the SBT training, copy of the ECITB certificate and that the individual has workplace experience in the SBT subject area they are being tested in. Private individuals will be required to submit a detailed CV and copies of pertinent ECITB certificates (where applicable) to the Test Centre before the test session which will indicate that the individual has previous SBT or instrument pipework training or pertinent ECITB Endorsed Course attendance and has work place experience demonstrated in the CV on the SBT subject area to be tested in. The Test Centre must advise candidates on the criteria not achieved and areas requiring further training, a minimum period of 4 weeks must lapse before the candidate can undertake a new testing session to allow for a period of training or practise. Stage 4 (Onshore Test Centre) ECITB Technical Competence Assessment To confirm the individual’s current skills, knowledge and ability the ECITB technical competence validation test is undertaken every 3 years to prove on-going performance development. If required the individual can undertake a short computer based training module to refresh their job knowledge before attempting the technical test. The Test Centre must confirm the following information with the employer/candidate before arranging the test session: Previous Certificate of Achievement – the Test Centre must carry out a check to confirm the certificate is genuine before arranging the test session. Candidates with expired ECITB test certificates – the candidate will require a company letter of endorsement (LoE) confirming SBT activities are regularly carried out. Private individuals will be required to submit a detailed CV with two references regarding SBT activities carried out Successful candidates achieve the certificate of achievement which is valid for a period of 3 years. Unsuccessful candidates must wait a minimum period of 4 weeks between the unsuccessful test session and next test session to allow a period of training to address any skills or knowledge gaps. The Test Centre must advise unsuccessful candidates on the criteria not achieved and areas requiring further training, a minimum period of 4 weeks and maximum period of 3 months must lapse before the candidate can undertake a new testing session to allow for a period of training or practise. Each technical test consists of a knowledge and practical test. The knowledge test requires a minimum 80% pass rate and on successful completion of the knowledge test the candidate will proceed to a practical activity test against identified test criteria. The duration is between 1 and 3 hours to complete both elements. Successful candidates will achieve ECITB certificate of achievement valid for 36 months. Training costs are mostly made up of travel & accommodation and not the course price itself. We can help reduce your training budget by eliminating these unnecessary travel and accommodation costs. We offer refresher sessions (eLearning CBTs and hands-on sessions) to reduce referrals We deliver both SBT and MJI theory and technical assessments eliminating any requirement for other training providers We are strategically based in Aberdeen by the airport and Dyce train station which reduces in-city transport We offer early start, evening and weekend slots to work around mobilisation and demobilisations to assets An ECITB Technical Test provides a snapshot of an individual’s current ability – much like an MOT. A test might be carried out for various reasons, such as a contractual requirement or in relation to a specific industry skills need (such as Mechanical Joint Integrity Offshore). Technical Tests focus on related aspects of craft and technical disciplines and test both an individual’s knowledge of, and then their ability to perform, a specific industry task. Tests typically take one or two hours to complete, which means the same individual can take tests in several different skills in a day. ECITB in conjunction with Step Change in Safety have agreed the model below to be promoted to industry and delivered by the ECITB approved training providers and test centres.

  • TSBT 04 | AFS Technologies

    TSBT 04 Prepare and Pressure Test SBT Assemblies Stage 3 – (Onshore Test Centre based) CLICK HERE to see our pressure test bay area Book via email to training@afst.uk.com Stage 3 requires each individual to complete a formal assessment of their job knowledge, skills and ability in each Small Bore Tubing subject. The ECITB technical competence validation tests are standards based consisting of a bank of online knowledge questions and a practical task to validate the learner’s skills, knowledge and ability. The online knowledge test must be conducted as a closed book test; the candidate is not allowed to use handouts or reference materials in this part of the test. The candidate will be given access to reference materials for the practical element of the test. Successful candidates attain the ECITB certificate of achievement which is valid for a period of 3 years. Unsuccessful candidates must wait a minimum period of 4 weeks between the unsuccessful test session and next test session to allow for a period of training to address any skills or knowledge gaps. The Test Centre must confirm the following information with the employer/candidate before arranging the test session: Newly Trained Workers The Test Centre must ensure the newly trained worker has successfully completed Stages 1 and 2. A record of the Approved Course certificate serial number will be recorded on the completed Work Based Task Assignment. The completed Work Based Task Assignment will be stored along with the completed paper Examiner’s Results sheet for audit purposes. Existing Workers/Private Individuals Existing Workers will require a company letter of endorsement confirming attendance of previous BT or instrument pipework training or copies of pertinent ECITB certificates (where applicable) and that the individual has workplace experience in the SBT subject area they are being tested in. Existing Workers who attend one of the SBT training courses as “refresher training” must wait a minimum period of 4 weeks before being granted access to the relevant technical test. The Existing Workers will require a company letter of endorsement confirming attendance of the SBT training, copy of the ECITB certificate and that the individual has workplace experience in the SBT subject area they are being tested in. Private individuals will be required to submit a detailed CV and copies of pertinent ECITB certificates (where applicable) to the Test Centre before the test session which will indicate that the individual has previous SBT or instrument pipework training or pertinent ECITB Endorsed Course attendance and has work place experience demonstrated in the CV on the SBT subject area to be tested in. The Test Centre must advise candidates on the criteria not achieved and areas requiring further training, a minimum period of 4 weeks must lapse before the candidate can undertake a new testing session to allow for a period of training or practise. Stage 4 (OnshoreTest Centre) ECITB Technical Competence Assessment To confirm the individual’s current skills, knowledge and ability the ECITB technical competence validation test is undertaken every 3 years to prove on-going performance development. If required the individual can undertake a short computer based training module to refresh their job knowledge before attempting the technical test. The Test Centre must confirm the following information with the employer/candidate before arranging the test session: Previous Certificate of Achievement – the Test Centre must carry out a check to confirm the certificate is genuine before arranging the test session. Candidates with expired ECITB test certificates – the candidate will require a company letter of endorsement (LoE) confirming SBT activities are regularly carried out. Private individuals will be required to submit a detailed CV with two references regarding SBT activities carried out. Successful candidates achieve the certificate of achievement which is valid for a period of 3 years. Unsuccessful candidates must wait a minimum period of 4 weeks between the unsuccessful test session and next test session to allow a period of training to address any skills or knowledge gaps. The Test Centre must advise unsuccessful candidates on the criteria not achieved and areas requiring further training, a minimum period of 4 weeks and maximum period of 3 months must lapse before the candidate can undertake a new testing session to allow for a period of training or practise. Each technical test consists of a knowledge and practical test. The knowledge test requires a minimum 80% pass rate and on successful completion of the knowledge test the candidate will proceed to a practical activity test against identified test criteria. The duration is between 1 and 3 hours to complete both elements. Successful candidates will achieve ECITB certificate of achievement valid for 36 months. Minimum estimated trainer to learner contact time 12 hours, minimum of 4 practical exercises consisting of lead hand pump SBT assembly test/assist hand pump SBT assembly test, lead air driven test pump SBT assembly test/assist air driven pump SBT assembly test. Training costs are mostly made up of travel & accommodation and not the course price itself. We can help reduce your training budget by eliminating these unnecessary travel and accommodation costs. We offer refresher sessions (eLearning CBTs and hands-on sessions) to reduce referrals We deliver both SBT and MJI theory and technical assessments eliminating any requirement for other training providers We are strategically based in Aberdeen by the airport and Dyce train station which reduces in-city transport We offer early start, evening and weekend slots to work around mobilisation and demobilisations to assets An ECITB Technical Test provides a snapshot of an individual’s current ability – much like an MOT. A test might be carried out for various reasons, such as a contractual requirement or in relation to a specific industry skills need (such as Mechanical Joint Integrity Offshore). Technical Tests focus on related aspects of craft and technical disciplines and test both an individual’s knowledge of, and then their ability to perform, a specific industry task. Tests typically take one or two hours to complete, which means the same individual can take tests in several different skills in a day. ECITB in conjunction with Step Change in Safety have agreed the model below to be promoted to industry and delivered by the ECITB approved training providers and test centres.

  • TSBT 03 | AFS Technologies

    TSBT 03 Assemble and Install SBT (Cone & Threaded) Stage 3 – (Onshore Test Centre based) Book via email to training@afst.uk.com Stage 3 requires each individual to complete a formal assessment of their job knowledge, skills and ability in each Small Bore Tubing subject. The ECITB technical competence validation tests are standards based consisting of a bank of online knowledge questions and a practical task to validate the learner’s skills, knowledge and ability. The online knowledge test must be conducted as a closed book test; the candidate is not allowed to use handouts or reference materials in this part of the test. The candidate will be given access to reference materials for the practical element of the test. Successful candidates attain the ECITB certificate of achievement which is valid for a period of 3 years. Unsuccessful candidates must wait a minimum period of 4 weeks between the unsuccessful test session and next test session to allow for a period of training to address any skills or knowledge gaps. The Test Centre must confirm the following information with the employer/candidate before arranging the test session: Newly Trained Workers The Test Centre must ensure the newly trained worker has successfully completed Stages 1 and 2. A record of the Approved Course certificate serial number will be recorded on the completed Work Based Task Assignment. The completed Work Based Task Assignment will be stored along with the completed paper Examiner’s Results sheet for audit purposes. Existing Workers/Private Individuals Existing Workers will require a company letter of endorsement confirming attendance of previous BT or instrument pipework training or copies of pertinent ECITB certificates (where applicable) and that the individual has workplace experience in the SBT subject area they are being tested in. Existing Workers who attend one of the SBT training courses as “refresher training” must wait a minimum period of 4 weeks before being granted access to the relevant technical test. The Existing Workers will require a company letter of endorsement confirming attendance of the SBT training, copy of the ECITB certificate and that the individual has workplace experience in the SBT subject area they are being tested in. Private individuals will be required to submit a detailed CV and copies of pertinent ECITB certificates (where applicable) to the Test Centre before the test session which will indicate that the individual has previous SBT or instrument pipework training or pertinent ECITB Endorsed Course attendance and has work place experience demonstrated in the CV on the SBT subject area to be tested in. The Test Centre must advise candidates on the criteria not achieved and areas requiring further training, a minimum period of 4 weeks must lapse before the candidate can undertake a new testing session to allow for a period of training or practise. Stage 4 (OnshoreTest Centre) ECITB Technical Competence Assessment. To confirm the individual’s current skills, knowledge and ability the ECITB technical competence validation test is undertaken every 3 years to prove on-going performance development. If required the individual can undertake a short computer based training module to refresh their job knowledge before attempting the technical test. The Test Centre must confirm the following information with the employer/candidate before arranging the test session: Previous Certificate of Achievement – the Test Centre must carry out a check to confirm the certificate is genuine before arranging the test session. Candidates with expired ECITB test certificates – the candidate will require a company letter of endorsement (LoE) confirming SBT activities are regularly carried out. Private individuals will be required to submit a detailed CV with two references regarding SBT activities carried out. Successful candidates achieve the certificate of achievement which is valid for a period of 3 years. Unsuccessful candidates must wait a minimum period of 4 weeks between the unsuccessful test session and next test session to allow a period of training to address any skills or knowledge gaps. The Test Centre must advise unsuccessful candidates on the criteria not achieved and areas requiring further training, a minimum period of 4 weeks and maximum period of 3 months must lapse before the candidate can undertake a new testing session to allow for a period of training or practise. Each technical test consists of a knowledge and practical test. The knowledge test requires a minimum 80% pass rate and on successful completion of the knowledge test the candidate will proceed to a practical activity test against identified test criteria. The duration is between 1 and 3 hours to complete both elements. Successful candidates will achieve ECITB certificate of achievement valid for 36 months. Training costs are mostly made up of travel & accommodation and not the course price itself. We can help reduce your training budget by eliminating these unnecessary travel and accommodation costs. We offer refresher sessions (eLearning CBTs and hands-on sessions) to reduce referrals We deliver both SBT and MJI theory and technical assessments eliminating any requirement for other training providers We are strategically based in Aberdeen by the airport and Dyce train station which reduces in-city transport We offer early start, evening and weekend slots to work around mobilisation and demobilisations to assets An ECITB Technical Test provides a snapshot of an individual’s current ability – much like an MOT. A test might be carried out for various reasons, such as a contractual requirement or in relation to a specific industry skills need (such as Mechanical Joint Integrity Offshore). Technical Tests focus on related aspects of craft and technical disciplines and test both an individual’s knowledge of, and then their ability to perform, a specific industry task. Tests typically take one or two hours to complete, which means the same individual can take tests in several different skills in a day. ECITB in conjunction with Step Change in Safety have agreed the model below to be promoted to industry and delivered by the ECITB approved training providers and test centres.

  • TSBT 02 | AFS Technologies

    TSBT 02 Disassemble and reinstall SBT Assemblies Stage 3 – (Onshore Test Centre based) Book via email to training@afst.uk.com Stage 3 requires each individual to complete a formal assessment of their job knowledge, skills and ability in each Small Bore Tubing subject. The ECITB technical competence validation tests are standards based consisting of a bank of online knowledge questions and a practical task to validate the learner’s skills, knowledge and ability. The online knowledge test must be conducted as a closed book test; the candidate is not allowed to use handouts or reference materials in this part of the test. The candidate will be given access to reference materials for the practical element of the test. Successful candidates attain the ECITB certificate of achievement which is valid for a period of 3 years. Unsuccessful candidates must wait a minimum period of 4 weeks between the unsuccessful test session and next test session to allow for a period of training to address any skills or knowledge gaps. The Test Centre must confirm the following information with the employer/candidate before arranging the test session: Newly Trained Workers The Test Centre must ensure the newly trained worker has successfully completed Stages 1 and 2. A record of the Approved Course certificate serial number will be recorded on the completed Work Based Task Assignment. The completed Work Based Task Assignment will be stored along with the completed paper Examiner’s Results sheet for audit purposes. Existing Workers/Private Individuals Existing Workers will require a company letter of endorsement confirming attendance of previous BT or instrument pipework training or copies of pertinent ECITB certificates (where applicable) and that the individual has workplace experience in the SBT subject area they are being tested in. Existing Workers who attend one of the SBT training courses as “refresher training” must wait a minimum period of 4 weeks before being granted access to the relevant technical test. The Existing Workers will require a company letter of endorsement confirming attendance of the SBT training, copy of the ECITB certificate and that the individual has workplace experience in the SBT subject area they are being tested in. Private individuals will be required to submit a detailed CV and copies of pertinent ECITB certificates (where applicable) to the Test Centre before the test session which will indicate that the individual has previous SBT or instrument pipework training or pertinent ECITB Endorsed Course attendance and has work place experience demonstrated in the CV on the SBT subject area to be tested in. The Test Centre must advise candidates on the criteria not achieved and areas requiring further training, a minimum period of 4 weeks must lapse before the candidate can undertake a new testing session to allow for a period of training or practise. Stage 4 (Onshore Test Centre) ECITB Technical Competence Assessment To confirm the individual’s current skills, knowledge and ability the ECITB technical competence validation test is undertaken every 3 years to prove on-going performance development. If required the individual can undertake a short computer based training module to refresh their job knowledge before attempting the technical test. The Test Centre must confirm the following information with the employer/candidate before arranging the test session: Previous Certificate of Achievement – the Test Centre must carry out a check to confirm the certificate is genuine before arranging the test session. Candidates with expired ECITB test certificates – the candidate will require a company letter of endorsement (LoE) confirming SBT activities are regularly carried out. Private individuals will be required to submit a detailed CV with two references regarding SBT activities carried out Successful candidates achieve the certificate of achievement which is valid for a period of 3 years. Unsuccessful candidates must wait a minimum period of 4 weeks between the unsuccessful test session and next test session to allow a period of training to address any skills or knowledge gaps. The Test Centre must advise unsuccessful candidates on the criteria not achieved and areas requiring further training, a minimum period of 4 weeks and maximum period of 3 months must lapse before the candidate can undertake a new testing session to allow for a period of training or practise Each technical test consists of a knowledge and practical test. The knowledge test requires a minimum 80% pass rate and on successful completion of the knowledge test the candidate will proceed to a practical activity test against identified test criteria. The duration is between 1 and 3 hours to complete both elements. Successful candidates will achieve ECITB certificate of achievement valid for 36 months. Training costs are mostly made up of travel & accommodation and not the course price itself. We can help reduce your training budget by eliminating these unnecessary travel and accommodation costs. We offer refresher sessions (eLearning CBTs and hands-on sessions) to reduce referrals We deliver both SBT and MJI theory and technical assessments eliminating any requirement for other training providers We are strategically based in Aberdeen by the airport and Dyce train station which reduces in-city transport We offer early start, evening and weekend slots to work around mobilisation and demobilisations to assets An ECITB Technical Test provides a snapshot of an individual’s current ability – much like an MOT. A test might be carried out for various reasons, such as a contractual requirement or in relation to a specific industry skills need (such as Mechanical Joint Integrity Offshore). Technical Tests focus on related aspects of craft and technical disciplines and test both an individual’s knowledge of, and then their ability to perform, a specific industry task. Tests typically take one or two hours to complete, which means the same individual can take tests in several different skills in a day. ECITB in conjunction with Step Change in Safety have agreed the model below to be promoted to industry and delivered by the ECITB approved training providers and test centres.

bottom of page